-40%
USED STARTRITE AUTOMATIC BANDSAW, Model H250A, 10” x 10”
USED STARTRITE AUTOMATIC BANDSAW, Model H250A, 10” x 10”
USED STARTRITE AUTOMATIC BANDSAW, Model H250A, 10” x 10”
USED STARTRITE AUTOMATIC BANDSAW, Model H250A, 10” x 10”
USED STARTRITE AUTOMATIC BANDSAW, Model H250A, 10” x 10”
USED STARTRITE AUTOMATIC BANDSAW, Model H250A, 10” x 10”
USED STARTRITE AUTOMATIC BANDSAW, Model H250A, 10” x 10”

USED STARTRITE AUTOMATIC BANDSAW, Model H250A, 10” x 10”

$ 4725.59

Availability: 100 in stock
  • Max Cutting Capacity Length: 24 in
  • Voltage: 220 / 440 3 phase
  • Max Cutting Capacity Round: 10 in
  • Phase: Three
  • All returns accepted: ReturnsNotAccepted
  • Control: Automatic
  • Brand: STARTRITE
  • Power Source: Electric
  • Max Cutting Capacity Width: 10 in
  • Condition: Used
  • Model: H250A

    Description

    USED STARTRITE AUTOMATIC BANDSAW, Model H250A, 10” x 10”, Stock No. 8489
    Auto, 1” blade, 2HP, 50-300 FPM, Carbide guides, blade brush
    Rect-Cap (H)
    10 inches
    Rect-Cap (W)
    10 inches
    Rounds-Cap
    10 inches
    Square-Cap
    10 inches
    Power
    2 horsepower
    Type (Auto, Manual, Semi)
    automatic
    Blade Width
    1 inches
    Blade Thickness
    .035 inches
    Blade Length
    126 inches
    CNC Control
    no
    Weight
    1237 pounds
    Brand: Startrite
    Model:
    H250A
    Specifications
    Max. cutting cap. 90 deg, round: 10”
    Blade dimensions: 1” x 10’6” x .035”
    Blade guides: Carbide with Rollers
    Blade speeds: 50 - 300 FPM
    Number of speeds: Infinitely Variable
    Blade motor: 2 HP
    Blade wheel size: 14”
    Coolant tank capacity: 8-1/4 Gal
    Maximum feed length: 24”
    Table height: 28”
    Weight: 1,237 lbs
    Features:
    • Preset counter for desired number of cuts
    • Carbide blade guides with rollers
    • Flood coolant
    • Total enclosed transmission
    • Low voltage electrical circuit
    • Power blade brush
    • Automatic shut-off at end of stock
    We put our Bandsaws through a 20 Point Inspection and Repair Process assuring immediate performance when they hit your floor.
    NOTICE! IF BUYING THROUGH EBAY THERE IS A 10% ADDITIONAL CHARGE TO COVER EBAY FEES. IF PAYING THROUGH EBAY OR PAYPAL THERE WILL BE AN ADDITIONAL 3% FEE FOR THAT SERVICE!
    Westbrook Engineering is one of the country’s largest stocking dealers of used metal fabricating machinery specializing in bandsaws. We have over 40,000 square feet of warehouse space to repair and refurbish machinery back to factory specs prior to shipping to the customer.
    We will ship this item and cost will vary by buyer location. If you need a shipping rate just let us know. Please contact us.
    PLEASE READ!!!
    Do not answer any second chance offers or any other offer to buy this machine outside of Ebay. Scam artists are sending our bidders fake emails that look like official Ebay messages. If you have any questions about emails sent to you please call and verify that it came from us. 800 899 8182 ext.208
    Be sure to add us to your favorite sellers list for daily additions!!!
    Loaded on truck – No charge
    Payment is expected within 7 days of auction end. Buyer is responsible for all freight charges.
    6% Michigan sales tax where applicable.
    Machines will need to ship on a flatbed truck. If planning to ship in an enclosed trailer it will need to be crated. Crating charges are extra.
    If you have any questions or if you would like to schedule an inspection please contact us here in Warren, Michigan toll free at [phone removed by eBay]…ext.208…Good Luck and Happy Bidding.
    Provisions:
    It is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use, operation or set up, and to safeguard adequately the machine or machines to conform to all Federal, State and Local Government Safety Standards, and all Industry Safety Standards.
    MDNA return privilege applies to all machines (unless sold as-is). We will accept (within 30 days of shipment) any machines and equipment, freight prepaid, for refund of the purchase price if proven mechanically unsatisfactory; or repair at dealer’s option.
    Machines are shipped F.O.B. our plant. If damages are to occur during shipment it becomes the freight company’s responsibility.
    It is important that you contact us with in 24 hours.  You need to inform me of how and when you will pay for your item and how you plan on shipping it. If you do not contact me within 10 days it will be treated as a non paying bidder and the appropriate action will be taken
    .