Fender 0994070000 ULT-4 4-Button Footswitch for G-Dec 30 and B-Dec 30

Description

Fender made this for the G-DEC AND B-DEC. Any questions?
Engage your loop functionality and access the hidden features of your G-DEC 15, G-DEC 30, B-DEC 30, G-DEC 3 15, G-DEC 3 30
All G-DECs and B-DECs are on deck to get this functionality upgrade.
The ULT-4 is fully compatible with
● Fender G-DEC® 30
● Fender B-DEC®
Connect an (optional) Fender ULT-4 footswitch (P/N 0994070000) to your G-DEC 3 to enable remote control of essential G-DEC 3 functions. The footswitch screen and LEDs show you some of the same information as the amplifier display, so you can, for example, tune your guitar and select presets by watching the footswitch without ever looking at the G-DEC 3 display! • Select Quick Access presets • Use the Tuner • Select presets (up/down) • Start/stop Band tracks • Use the Phrase Sampler (play/record/overdub)
The footswitch has three modes that are indicated by the three LEDs labeled MODE 1, MODE 2 and MODE 3. The footswitch also has a Tuner mode which is indicated when all of the mode LEDs are off.
To switch between modes, press the MODE button. To activate Tuner mode, press and hold the MODE button for 2 seconds.
Mode 1—In Mode 1 the footswitch is used to select Quick Access presets as indicated by the labels (QA1 / QA2 / QA3) under each button, in line with the MODE 1 LED. When you select a Quick Access preset, the number of the preset will appear in the display of the footswitch.
Mode 2—In Mode 2 the footswitch is used to select presets and start/stop the band track as indicated by the labels (DOWN / UP / SELECT) under each button, in line with the MODE 2 LED. When you select a preset, the number of the preset will appear in the display of the footswitch.
Mode 3—In Mode 3 the footswitch is used to operate the Phrase Sampler as indicated by the labels (PLAY / RECORD / OVERDUB) under each button, in line with the MODE 3 LED. The footswitch button LEDs indicate your Phrase sampler actions, but the phrase progress bar is only displayed on the G-DEC 3 screen.
Tuner Mode—Press and hold the MODE button for 2 seconds to activate the Tuner. The screen and the footswitch both will display the same tuner information so that you can look in either place to tune your guitar. The footswitch will display the nearest note. The button LEDs will indicate sharp and flat. "In tune" is indicated when the green LED below the footswitch display lights up. Press any footswitch button to exit Tuner mode
My 2 cents: My first thought was, wow, the amp has opened amp, all the features I've long ignored are now within reach, just a footstep away...I had this amp for a year without the foot switch...it felt new again after the enhancement...,