Amada HFA700CII Horizontal Fully Automatic Metal Cutting Band Saw 32" Capacity

Description

Manufacturer: Amada Co., LTD Model: HFA-700CII Horizontal Fully Automatic Metal Cutting Bandsaw Serial No.: 70940033 Manufactured Date: 20?? Saw Blade: 27’3”L x 0.063”T x 2-5/8”W Work Load Cap: 17640lbs Cutting Capacity: Round: Round: 11.4” - 28” Rectangle: 32”W x 28H” Chip Disposal: Conveyor Electrical Specs: 220Volts, 3-Phase, 50/60HZ // All other Voltages Require a Transformer Machine Dimensions: 157.4”W x 84”L x 112.9”H Approx. Weight: Approx. 15435lbs Units is USED. Some minor scratching/blemishes/oil film along with signs of other wear on paint can be seen on the surfaces of the unit, but is not affecting the unit intended use. Unit is being sold ***AS-IS, WHERE-IS, AS-SHOWN.PLEASE DO NOT ASSUME THERE IS MORE TO IT. IF YOU ARE UNCERTAIN PLEASE BE SURE TO ASK PRIOR TO PURCHASING
Amada HFA700CII Horizontal Fully Automatic Metal Cutting Band Saw 32" Capacity
Click images to enlarge
Description
Amada HFA700CII
Horizontal Fully Automatic
Metal Cutting Bandsaw
Manufacturer:
Amada Co., LTD
Model:
HFA-700CII
Horizontal Fully Automatic Metal Cutting Band Saw
Serial No.:
70940033
Manufactured Date:
20?? - Unfortunately we can not read the last two numbers
Saw Blade:
27’3”L x 0.063”T x 2-5/8”W
Blade Speed:
50 - 394ft./min, Inverter
Work Load Cap:
17640lbs
Cutting Capacity:
Round: 11.4” - 28”
Rectangle: 32”W x 28H”
Saw Blade Motor:
15HP
Cutting Fluid Cap:
26.4 Gallons - Electric Pump
Chip Disposal:
Conveyor
Blade Control:
Top Limit Setting
— Auto Setting with Quick Approach Feeler
Electrical Specs:
220/230Volts, 3-Phase, 50/60HZ
//
All other Voltages Require a Transformer
Index Mechanism:
Shuttle Type - Stroke: 19.6”
Length: 0.39” - 999.999”
Remnant Length: 1.38”
Table Height:
27.6”
Above Floor
Machine Dimensions:
157.4”W x 84”L x 112.9”H
Approx.
Weight:
Approx. 15435lbs
Features:
High Accuracy for large-sized materials
This compact machine supports up to 32" x 28”
High accuracy cutting, and durability
Band Deviation Monitor
The NC controller constantly monitors the cutting and blade conditions, including the twist of the saw blade. When these exceed the preset parameters in the automatic blade run-out detector the machine will cease cutting and indicate the reason for stopping.
EXTRAS:
Both Roller Conveyors seen in the photo on either side of the unit are included in the sale of the saw
Seller Note:
Units is
USED
. Some minor scratching/blemishes/oil film along with signs of other wear on paint can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed from a working environment as seen in the pictures and was functioning as intended when removed from service. This unit was recently removed from production. Unit has been removed from the facility seen in the pictures and is being stored in our facility. Unit is being sold
***
AS-IS, WHERE-IS, AS-SHOWN.*** *** PLEASE DO NOT ASSUME THERE IS MORE TO IT. IF YOU ARE UNCERTAIN PLEASE BE SURE TO ASK PRIOR TO PURCHASING***.
Pictures are of the actual unit being purchased. Should the buyer want to see more pictures, please feel free to ask. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities.
Amada HFA-700CII Fully Automatic Band Saw
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]
Amada HFA-700CII Fully Automatic Band Saw showing functionality and chip conveyor
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]
Payment
Portage Packaging
will under
NO
circumstance ship a unit/item if payment has not cleared or the unit/item has not yet been paid for. Purchase price, crating, and packaging (if applicable) must be paid in
FULL
before unit/item will ship.
We accept
PayPal
If you do not have a PayPal
account, you can still check out with PayPal
as a guest, however, you will need to contact PayPal
for instructions. Also, the buyer can contact Portage Packaging to see if other payment arrangements can be made. If payment is made via PayPal
please be sure to have a PayPal
confirmed address.
All items
MUST
be paid for within
3 days
of purchasing the unit/ item. If a unit/item is not paid for within
3 days
we will open an unpaid item case through eBay to cancel the transaction. The faster payment is received, the sooner we can proceed to ship out the item.
Please contact us with any other payment arrangments that you might have
before
purchasing the unit.
For local pickups please contact us for payment methods available to pay upon pickup. Local pickup will save the buyer the shipping charges.
Shipping
Buyers can get an Instant Online Freight Quotes at Freight Quotes website. It's free, quick and easy to use. Please enter the shipping dimensions and shipping weight provided in the description.
If the unit is
oversized
,
palletized
or
over/heavyweight
, we suggest either local pick-up or buyer can make their own arrangements for freight. The buyer is responsible for all shipping charges including insurance, crating and packaging fees. (if applicable)
The unit/item will be wrapped/banded and shipped via Freight truck, per Buyers instructions, at the Buyers expense. See below for crating cost approximation. We will load the Freight truck for no additional charge.
Will can provide freight quotes upon the buyer's request. Please remember all freight quotes are estimates. We can not know the actual charge for the shipment unit the unit/item is fully prepared (crated, palletized & weighed) for shipment. The unit/item is not currently crated, all size dimensions and weights are only approximations. Any additional charges before or after shipment by the trucking company are the buyer's responsibilities.
Purchased units/items will be shipped as soon as possible after payments have been received and cleared. (Usually within 7-10 days business days) If the buyer needs to have the purchased unit/item expedited, please contact us to make arrangements ahead of time if at all possible
Most oversized units/items are palletized for the convenience of moving units/items (cost of the pallet will be the buyer's responsibility). If the unit/item is not palletized, we can also facilitate crating or palletizing if needed for your purchased unit/item for an additional cost, please call ahead for the cost. Typical costs start from 0-0 depending on the size of the pallet or crate.
When the unit/item can be shipped standard (UPS or FedEx) we will charge you the actual cost of shipping. If you need assistance with shipping, please contact us to make arrangements ahead of time, as that will add to the shipping time.
The Buyer always has the option to arrange local pickup to save the Buyer the cost of shipping the unit/item to their location.
***After you have purchased an Item on eBay please wait until we send over an updated invoice through eBay which reflects the correct shipping charges before paying as this will ensure that you are not overcharged for shipping.***
Terms of Sale
**CONDITION**
Unless specified otherwise, all items are sold untested and
AS-IS, WHERE-IS, AS-SHOWN
.
We do our best to take representative pictures & videos of the actual items.
**PICTURES & VIDEOS**
If you don't see something in the pictures, or in the description; it is
not included
. If the buyer thinks there should be something more included, please contact Portage Packaging ahead of time to verify the details of the included items. The buyer is not to infer or assume that any other items or accessories are included unless outlined in the description for the unit/item above.
**ALL SALES ARE FINAL**
T
here is
NO WARRANTY IMPLIED OR EXPRESSED
for any units/items we sell.  We do not offer exchanges or accept returns.
**BEST OFFER**
Many of the units/items in our store are eligible for you to make us an offer. Use the "Make Offer" button (if available) to send us an offer on the unit/item you are interested in purchasing. Please note that our regular business hours are Monday through Friday, except for holidays.
About Us
Portage Packaging is a new and used equipment dealer in Hiram, Ohio. We are making an effort to present you with a large spectrum of items we offer. Check back in our store often.
Contact Us
P.O. Box 1776
5933 SR 82
Hiram, OH 44234
Buyers should use the "Ask Seller a Question" link at the top of the listing to request more information on any units/items for sale.
We will make every attempt to answer messages promptly Monday-Friday. Messages sent over a weekend may be answered on the next busniess day.
Please contact us with any questions that you may have for a particular unit/item before you make the purchase.
Get images that
make Supersized seem small.
Showcase your items with Auctiva's
Listing Templates!
THE simple solution for eBay sellers.
Track Page Views With
Auctiva's FREE Counter